Ideal for medium-to-large craft breweries, this system is used for fully automated mashing, lautering, boiling, and whirlpool processes. Suitable for producing a wide range of beer styles while ensuring high output, consistent quality, and streamlined automated production management.
Used 2000L 4 Vessel Automated Brewery Equipment is designed for medium-to-large craft breweries seeking high efficiency and consistent quality. This system integrates mash tun, lauter tun, kettle, and whirlpool in a fully automated setup, enabling precise control over temperature, flow rates, and timing throughout the brewing process. Its SUS304 stainless steel construction ensures durability and hygiene, while the automated PLC control panel allows brewers to program complex recipes, monitor each stage remotely, and achieve repeatable results with minimal manual intervention. Ideal for breweries producing a wide range of beer styles, this equipment maximizes productivity while reducing labor requirements and process variability.
Modernized used 2000L microbrewery equipment built on an industrial MICET design, adapted to your real project.
Tanks, brewhouse vessels, glycol system and pumps are inspected, deep-cleaned, partially overhauled and test-run before shipment.
Includes used brewhouse, used conical unitanks, used bright beer tanks, used glycol cooling system, used CIP system and used/semi-new control panel as one coherent 20HL brewing system.
Keep the original vessels and frames, upgrade with new pumps, valves, sensors, PLC/HMI to reach near-new usability with used 2000L equipment.
Layout suggestions, export packing, container loading guidance and remote commissioning support for your used 2000L brewery.
This Used 2000L 4-Vessel Brewery System is designed for modern craft breweries seeking high efficiency and automation. All vessels feature precise temperature, level, and flow control with integrated PLC systems, allowing fully automated brewing sequences, real-time monitoring, and energy-efficient operation.
Total volume 2500L, effective 2000L (25% headspace)
Inner jacket SUS304 3.0mm; outer jacket SUS304 2.0mm; cone 2.0mm
100mm rockwool insulation, round top manhole Ø500mm with safety interlock
Side grain discharge door 530×430mm with safety interlock
Automated raking knife system with VSD-controlled lifting and rotation
Laser-machined T-wire false bottom, rotating sparge arms
Integrated sensors for temperature and flow, internal light with timer, CIP spray ball
Total volume 2600L, effective 2000L (30% headspace)
Inner jacket SUS304 3.0mm; outer jacket SUS304 2.0mm
Bottom 170° cone, thickness 3.0mm, 100mm rockwool insulation
Top round manhole Ø500mm, side manway 530×430mm
2 × ring-type electric elements, 60kW total power with automated heating control
External steam vent with condensate collection, PLC-controlled level regulation
Internal light, CIP spray balls, mirror-polished interior
Total volume 2500L, effective 2000L (25% headspace)
Inner jacket SUS304 3.0mm; outer jacket SUS304 2.0mm
3° flat bottom 3.0mm, 100mm rockwool insulation
Twin tangential whirlpool inlets, twin bottom outlets (central + mid-level)
Automated CIP cleaning, integrated temperature and flow sensors
External sight glass, PT100 sensor, PLC-monitored level control
Hot Liquor Tank (HLT) 4000L / 4400L
Total 4400L, effective 4000L
Inner jacket SUS304 3.0mm; outer 2.0mm, 100mm polyurethane insulation
Top Ø500mm manhole, side manway 530×430mm, recirculation port
90kW electric heating with automated temperature control
PT100 sensors, automated level management via PLC, integrated CIP spray balls
Fully automated brewing sequences with touch-screen HMI control
Real-time monitoring of temperature, flow, and liquid levels
VSD-controlled pumps and rakes for energy efficiency
Integrated CIP system for automated cleaning
Based on the MICET 2000L fermentation layout, a typical used 2000L brewery cellar includes:
Cooling and cleaning modules sized to match the used 2000L brewery design, with hybrid used + new options.
A structured, documented workflow so your used 2000L brewery equipment is reliable for new production.
Check tanks, jackets, welds, pumps, chiller and control panel for structural integrity, corrosion, leaks and obvious defects.
Open manways and key connections, remove residues and scale, perform internal cleaning and acid passivation of product-contact surfaces.
Replace selected gaskets, seals, valves, sight glasses, hoses, sensors, PRVs, and rebuild or swap pumps and motors as needed
Pressure-test jackets and shells, test CIP coverage, run pumps and mixers under load, and check control logic.
Provide photos, test records and a clear condition description (“as-is / cleaned & tested / refurbished”) and then perform export packing.
| Section | Equipment | Quantity | Key Technical Parameters (Used 2000L 4-Vessel) |
|---|---|---|---|
| Grain Handling | Grist hopper with hydrator | 1 set | SUS304; 2.0 m²; removable cover; sight glass; dust-reducing auger entry; hot/cold water mixer; internal spray ball; integrated with automated feeding system |
| Grain Handling | Screw auger | 1 set | SUS304; 2000 kg/h; approx. 6 m length; reducer + motor + control; floor grist case with bag breaker; automated start/stop synchronized with brewhouse PLC |
| 2000L Brewhouse | Mash/lauter tun | 1 unit | Total 2500L, effective 2000L; SUS304 inner 3.0 mm, outer 2.0 mm; 3° cone; 100 mm rockwool; Ø500 mm manhole; automated rake rotation; T-wire false bottom; CIP spray ball; temperature probe; Ra 0.4 μm; fully integrated with PLC control for mash profile |
| 2000L Brewhouse | Kettle / copper | 1 unit | Total 2600L, effective 2000L; inner 3.0 mm, outer 2.0 mm; 170° cone; 100 mm rockwool; Ø500 mm manhole; 2× electric heating 60 kW; automated heating & pump control via PLC; CIP spray ball; Ra 0.4 μm |
| 2000L Brewhouse | Whirlpool tank | 1 unit | Total 2500L, effective 2000L; inner 3.0 mm, outer 2.0 mm; 3° flat bottom; 100 mm rockwool; Ø500 mm manhole; twin tangential inlets/outlets; sight tube; PT100; automated whirlpool timing & CIP cycles; Ra 0.4 μm |
| Liquor Tanks | Hot Liquor Tank (HLT) | 1 unit | Total 4400L, effective 4000L; inner 3.0 mm, outer 2.0 mm; 100 mm PU; Ø500 mm manhole; 90 kW electric heating; automatic temperature control; recirculation pump automated via PLC; level transducer; CIP spray balls |
| Liquor Tanks | Cold Liquor Tank (CLT) | 1 unit | Total 4400L, effective 4000L; inner 3.0 mm, outer 2.0 mm; 100 mm PU; dual-zone cooling jacket; PT100 sensors; automated temperature regulation; CIP spray balls; integrated PLC monitoring |
| Heat Exchange | Plate heat exchanger | 1 unit | SUS304; 21 m²; 2-stage cooling (tap water + glycol); automated flow control; connected to HLT & brewhouse PLC |
| Control | Brewhouse / fermenting control | 1 set | Stainless control panel; PLC + 10” touchscreen; multiple temperature points; automatic pump & valve control; batch recipe automation; alarms & fault detection; data logging; remote monitoring capability; English labels |
Share your brewhouse size, yearly volume and cellar layout. We will prepare a detailed offer for our used 2000L fermentation tank, including refurbishment scope, accessories, cooling integration options and delivery plan.
1営業日以内にご連絡いたしますので、「@micetbrewing.com」のサフィックスの付いたメールにご注意ください。 “@micetbrewing.com”。
*あなたのプライバシーを尊重します。提出されたすべての情報は厳密に機密扱いです。
あなたの詳細は、問い合わせに応答するためにのみ使用されます。無断でのメールやプロモーションメッセージは決して送信しません。